Weld Rich & Steel
structural welding company
structural welding company
Industrial stairs & landings
Code-compliant industrial stair systems and landings engineered for safe access, durability, and high-traffic use in warehouses, manufacturing plants, and commercial buildings across Toronto & the GTA.
Industrial steel stairs and landings are critical access components in commercial and industrial facilities, supporting daily operations, equipment access, and emergency egress. In Ontario, these systems must be engineered to meet strict structural, safety, and regulatory requirements, making proper design and fabrication essential to long-term performance and compliance.
At Weld Rich & Steel, we fabricate and install industrial stair systems, landings, and stair towers designed for high-traffic environments and demanding operational conditions. Each project is reviewed for load requirements, circulation needs, and site constraints, ensuring full alignment with Ontario Building Code and workplace safety standards. From service stairs and fire exits to multi-level industrial access systems, our solutions deliver durable construction, safe movement, and reliable integration within commercial facilities.
Industrial stair & landing systems
Industrial stair systems and landings must provide safe, reliable access in demanding commercial environments while supporting daily operations and emergency egress. Below are the steel stair solutions we fabricate and install for industrial and commercial facilities.
Self-supporting or structurally integrated stair towers designed for multi-level access in warehouses, manufacturing plants, and commercial buildings. Engineered for heavy use and long-term durability.
Code-compliant steel stair systems fabricated for emergency exit routes, exterior egress paths, and fire-rated access points. Designed to support safe evacuation and regulatory compliance.
Narrow-span access systems used for inspections, maintenance, production oversight, and movement between elevated work areas. Fabricated with guardrails and safety features for CSA-compliant access.
Custom-fabricated stair systems for both interior and exterior applications, adapted to site conditions, environmental exposure, and operational requirements.
Steel landings and intermediate platforms are integrated into stair systems to support level changes, rest points, and directional transitions within commercial facilities.
Project-specific stair solutions for renovations, facility upgrades, and non-standard layouts, including replacement of outdated stair systems or integration into existing structures.
Materials & Styles
Industrial steel stairs and landings must be fabricated from structural-grade materials and finished to withstand high traffic, environmental exposure, and demanding operational conditions.
| Material / Profile Type | Application | Key Characteristics |
|---|---|---|
| HSS Stringers (Square / Rectangular) | Primary stair stringers | High strength, clean geometry, excellent load capacity |
| Plate Steel Stringers | Heavy-duty stair systems | Suitable for high loads and industrial environments |
| C-Channels & Angles | Secondary framing and supports | Efficient load distribution and structural reinforcement |
| Custom Welded Assemblies | Non-standard stair layouts | Fabricated to project drawings for precise fit |
| Tread / Surface Type | Typical Use | Benefits |
|---|---|---|
| Checker Plate Steel Treads | Interior & exterior stairs | Durable, slip-resistant surface for high-traffic use |
| Open Steel Grating | Industrial & exterior applications | Allows drainage, improves visibility, reduces debris buildup |
| Bar Grating Landings | Mechanical rooms & service stairs | High load capacity with ventilation |
| Concrete-Filled Steel Pan Treads | Commercial interiors | Reduced noise and enhanced durability |
| Finish Type | Indoor | Outdoor | Benefits |
|---|---|---|---|
| Standard Shop Primer | Yes | Limited | Temporary corrosion protection during installation |
| Powder Coating | Yes | Yes | Durable finish suitable for high-visibility areas |
| Hot-Dip Galvanizing | Yes | Yes | Maximum corrosion resistance for exterior stairs |
| High-Performance Epoxy Coatings | Yes | Yes | Protection against chemicals and heavy wear |
Engineering & Compliance Notes
Key considerations
Industrial stair systems and landings must be engineered to support safe circulation, meet regulatory requirements, and perform reliably under continuous commercial use.
Stairs and landings must be designed to support anticipated foot traffic, equipment access, and operational loads. Load assumptions vary depending on stair type, frequency of use, and whether the system serves daily operations or emergency egress.
Industrial stair systems must align with the Ontario Building Code and applicable OHSA regulations governing access, egress, and worker safety. Compliance considerations affect stair geometry, clearances, and overall system layout.
Interior and exterior stairs require different material selections and protective finishes. Environmental factors such as moisture, temperature changes, and exposure to chemicals or debris directly influence long-term performance and maintenance needs.
Stairs and landings must integrate seamlessly with existing floor plans, mezzanines, equipment areas, and workflow paths. Proper layout ensures efficient movement, minimizes disruption, and supports safe daily operations.
Gallery
View selected industrial stair towers, fire exit stairs, service stairs, and landing systems fabricated and installed for commercial and industrial facilities across Toronto and the GTA.
Industrial stairs & landings
In most cases, yes. Stair systems that serve commercial or industrial spaces, affect egress routes, or involve structural modifications typically require engineer-stamped drawings and a building permit in accordance with the Ontario Building Code.
Service stairs are designed for routine operational and maintenance access, while emergency exit stairs are dedicated to safe evacuation. Each type is engineered with different usage conditions and compliance requirements in mind.
Yes. Industrial stair systems can be fabricated for interior or exterior use, with material selection and protective coatings adjusted to match environmental exposure and operational demands.
For required fall protection and perimeter safety around stairways and landings, explore our Safety Railings & Guards services. Browse all services on our Commercial Structural Steel Fabrication page.
Applications
Industrial steel stairs and landings are essential access and circulation elements in commercial and industrial facilities, supporting daily operations, maintenance activities, and emergency egress.
Typical commercial and industrial applications include:
Industrial stair systems and landings are designed and fabricated in accordance with applicable Ontario and Canadian regulations, including the Ontario Building Code (OBC), Occupational Health and Safety Act (OHSA), and relevant CSA Group standards for structural steel and welded construction. All fabrication is performed by CWB-certified welders, ensuring compliance with recognized safety, quality, and performance requirements for commercial and industrial facilities.
Authoritative references:
